Monday 12 December 2011

How to Make a Dress Part 11: Attaching the Collar and the Bow

This week we will attach the collar and bow.


How to Attach the Collar and Neck-line Facing

Get your collar halves that you made earlier and place them on the RS out dress. Pin and baste along the seam line, or maybe a little inside the seam allowance if you prefer
Then get your neckline facing and place it RS down on top of the collar. Pin and baste. Then sew along the neckline taking the stated seam allowance (in most cases 1.5mm or 5/8").

Grade and notch the seam allowance. Trim the corner near the zip to reduce bulk. Turn the facing to the WS and pin and baste. Press.

With the back seam lines even (along the zip), hand-stitch the facing to the zip tape.

Pin the facing to the dress inside as shown (the sticky-up thing is the collar).

Now hand under-stitch the facing to the seam allowance. A hand under-stitch is basically a backstitch that has a tiny stitch on top and a long stitch underneath. It helps keep the facing in place. Do this all along the neck-line. Press.

Match up the shoulder seams on the facing and the dress. Pin, keeping the facing smooth against the dress.

Now invisibly hem the facing to the dress, with fairly loose stitches, taking up only one thread of the dress fabric at a time.

Turn the dress RS out. As you can see, it is not very neat at the CF of the neckline. That is because of the way I made the collar (see one of the previous posts). It's okay because we're going to cover that up with the bow.

Just overcast the edges by hand to keep them from fraying. You'll probably have to trim them down first.










How to Make and Attach the Bow

Get your two "bow" pieces which were cut on the bias. Place them RS together and sew around from dot to dot. Then trim and notch the edges. Turn RS out.

Tuck the opening's seam allowance in and hand stitch closed.

Top-stitch all around the edge of the bow-to-be.


Fold the bow in half. The fold the long edges over again so that it's kind of like a fan. Then with your sewing machine on a 0 length zigzag stitch, sew in the centre to secure it.


To make the tie get a rectangle of fabric, your pattern will either include the paper pattern or tell the size. I made the paper pattern to go with this pattern (which I made, in case you just found this blog). Stitch along one short end and along the long end.

Now, using a pencil, turn the tie RS out.


Put it in the dress, so that the raw edge is against the point of the neckline and sew it by hand to the facing.

Now place the bow on the dress and wrap the tie around it, tucking it under at the front. Hand stitch securely all around the tie, as invisibly as you can.

I'd have included the photo but the Blogger software decided to hide those buttons. : )

I think that will have to do this week, because I have run out of time. Next week we'll make and sew the inset, and hem the dress. Then we're done!

Hope that helps!

Until next time, happy sewing!
Sabrina Wharton-Brown
The Sewing Corner Haberdashery, Hornsea, HU18 1AP, UK

Labels: ,

0 Comments:

Post a Comment

Subscribe to Post Comments [Atom]

<< Home